| Amplifier Type | Class AB | ||
|---|---|---|---|
| CEA-2006 Primary Ratings | Power Output | 60Watts RMS x 2 at 4 Ohms and ≤1%THD+N | |
| Signal-to-Noise Ratio | 80dBA (Reference: 1Watt into 4Ohms) | ||
| Maximum Power Output | MAX POWER | 350W | |
| Maximum Power Output | 175W x 2 | ||
| Power Output | Rated Power at 14.4V | 60Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.0% THD) 75Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.0% THD) 150Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.0% THD) |
|
| Specifications | Signal to Noise Ratio | 95dB (Reference: Rated Power into 4Ohms at 14.4V) | |
| Total Harmonic Distortion | 0.08% (Rated Power at 4Ohms, 20-20kHz, 14.4V) | ||
| Damping Factor | 500 (at 50Hz) | ||
| Frequency Response | 5Hz-50kHz (+0dB, -3dB) | ||
| Input Impedance | 10k ohm | ||
| Audio Section | Low-Pass Filter | Built in Low-Pass Filter (80Hz, -18dB/oct) | |
| RCA Input Sensitivity | 0.2[V] - 5.0 [V] | ||
| Speaker Level Input Sensitivity | 4.0 [V] - 12.0 [V] | ||
| Terminals | Battery & Ground | Screw Type Terminal Block (Ni) (M4) | |
| Speaker Output | Screw Type Terminal Block (Ni) (M4) | ||
| Line In | RCA (Ni) | ||
| Speaker Input | JST Connector | ||
| General | Dimensions(WxHxD) | 225 [mm] x 55 [mm] x 180 [mm] 8-7/8 inch x 2-3/16 inch x 7-1/16 inch |
|
| Operating Voltage |
14.4 [V]EE1-16V allowableEE/td> | ||
| Key Features | CEA-2006 Compliant Speaker Level Input Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design |
||
