Title | Stereo/Bridgeable Power Amplifier | |
---|---|---|
Amplifier Type | Class AB | |
Series | PERFORMANCE SERIES | |
CEA-2006 Primary Ratings | Power Output | 70 Watts RMS x 2 at 4 Ohms and ≤1%THD+N |
Signal-to-Noise Ratio | 80dBA (Reference: 1Watt into 4Ohms) | |
Maximum Power Output | MAX POWER | 500W |
Power Output | Rated Power at 14.4V | 70Watts RMS x [ch] (4 Ohms, 20-20k
Hz, ≤1.00 % THD) 85 Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00 % THD) 170 Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00 % THD) |
Specifications | Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
Frequency Response | 20Hz-50k
Hz (+0dB, -3dB) Class AB |
|
Input Impedance | 10k ohm | |
Speaker Impedance (Bridged connection) | 4 Ω ( 2 Ω to 8 Ω allowable) | |
Speaker Impedance (Bridged connection) | 4 Ω to 8 Ω allowable | |
Audio Section | Low-Pass Filter |
Built in Low-Pass Filter (80Hz, -18 dB/oct) |
RCA Input Sensitivity | 0.2[V] - 5.0 [V] | |
Speaker Level Input Sensitivity |
4.0[V] - 12.0 [V] | |
Terminals | Battery & Ground | Screw Type Terminal Block (Nickel colored) (M4) |
Speaker Output | Screw Type Terminal Block (Nickel colored) (M4) | |
Line In | RCA (Nickel colored) | |
Speaker Input | Connector (Balance) | |
General | Dimensions(WxHxD) | 230 [mm] x 56 [mm] x 167 [mm] 9-1/16 inch x 2-3/16 inch x 6-9/16 inch |
Weight (kg) | 1.4 [kg] 3.1 [lbs] | |
Operating Voltage | 14.4V ( 11.0 - 16.0 V allowable) | |
Current Consumption | 15 [A] | |
Key Features | CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design |
|
Others | Triangle Indicator |